SYN GAS ANALYZEER

Product Description

A Syngas Analyzer specification depends on its intended application, but the general specifications typically include key performance parameters, supported gases, sensor types, and operational requirements. Below is a template for a detailed Syngas Analyzer Specification:

Specification for Syngas Analyzer

1. General Description

A Syngas Analyzer for real-time monitoring of synthesis gas composition. The device should measure the concentration of key gas components with high accuracy and reliability in industrial environments, such as gasification plants, chemical synthesis facilities, and energy production.

2. Measured Components

• Hydrogen (H): 0“100% (typical range)
• Carbon Monoxide (CO): 0“100% (typical range)
• Carbon Dioxide (CO): 0“50% (typical range)
• Methane (CH„): 0“10% (typical range)
• Oxygen (O): 0“25% (optional, based on application)
• Nitrogen (N): Optional (calculated balance)
• Other Hydrocarbons: Optional (e.g., CH†)

3. Measurement Principle

• Sensor Types:
  • Infrared Absorption (NDIR) for CO, CO, and CH„
  • Thermal Conductivity Detector (TCD) for H
  • Electrochemical or Paramagnetic for O
  • Gas Chromatography (optional, for detailed speciation)
• Detection Limits: As low as 0.1 ppm for critical gases
• Response Time: ‰ 10 seconds for most gases
• Repeatability: ±0.5% of the full scale
• Accuracy: ±1% of the reading

4. Environmental and Operating Conditions

• Ambient Temperature Range: -10C to +50C (typical)
• Relative Humidity: 0“95%, non-condensing
• Sample Gas Temperature: 0“200C (with conditioning options)
• Sample Gas Pressure: 0.5“2 bar (typical)
• Dust Filtration: Built-in filters for particulates ‰5 m
• Corrosive Resistance: Materials compatible with syngas components (e.g., stainless steel)

5. Outputs and Communication

• Display: Digital or touch-screen interface for live data
• Data Logging: Internal memory or external storage (e.g., USB)
• Communication Protocols:
  • Analog Outputs: 4“20 mA, 0“10 V
  • Digital Outputs: RS485/RS232, Modbus, HART, Ethernet
• Alarms: User-configurable for critical thresholds
• Integration: Compatible with SCADA/DCS systems

6. Power Supply

• Input Voltage: 110“240 VAC, 50/60 Hz or 24 VDC
• Power Consumption: ‰ 50 W (typical)

7. Certification and Compliance

• Standards:
  • ISO 9001:2015
  • ATEX or IECEx for hazardous environments
  • CE Marking
  • RoHS Compliance
• Calibration: Factory calibrated, with field calibration capability

8. Physical Specifications

• Dimensions: Compact design (e.g., ‰ 300 x 200 x 150 mm)
• Weight: ‰ 5 kg
• Enclosure: IP65 or higher for industrial use
• Mounting Options: Wall-mounted, rack-mounted, or portable

9. Optional Features

• Heated sampling lines for high-temperature gases
• Portable versions for field use
• Multi-channel configurations for simultaneous multi-point monitoring
• Integration with gas conditioning systems (e.g., dryers, coolers)